Visit the Naim E-Store
Naim Audio Main Website    forums  Hop To Forum Categories  Naim Users  Hop To Forums  Home Theatre    Upgrade existing Naim system to Home Theatre

Closed Topic Closed
Go
New
Find
Tools
  Login/Join 
New Member
Posted
Hello,

I would need some advice on how to convert the following Naim system (CDX2, 90/72/Hicap, Nat02, Epos 14) to a stereo/home theatre system. Do I have to update the 90/72 or can they be used with an Nvi or other ?

Thanks for your help
 
Posts: 7 | Registered: Wed 21 September 2005Edit or Delete MessageReport This Post
Trade Member
Posted Hide Post
Hi there, you can take the front left/right preouts of any surround amp (including n-Vi) and plug them into a free input on your 72. Then set the 72 to an obvious high place on the volume dial (12 o'clock is usual) and setup the surround system. Whenever you want to play the surround system, simply switch over the 72 to that input and set the volume to 12 o'clock. Use the surround amp as the master volume control. Remember to set the volume low again after watching otherwise you will get an ear blasting when you come to play your tuner or CD player.


Regards,
Frank.

All opinions are my own and do not reflect the opinion of any organisations I work for, except where this is stated explicitly.
 
Posts: 4348 | Location: UK | Registered: Wed 09 August 2000Edit or Delete MessageReport This Post
New Member
Posted Hide Post
Thanks for your reply Frank. Just to make sure I understand correctly, the stereo speaker cable would still be connected to the Naim part but let say a Denon AVR would be connected to the pre amp ? Is there a Naim pre-amp which allow this without requiring the volume dial trick ?
Regards,
Christophe
 
Posts: 7 | Registered: Wed 21 September 2005Edit or Delete MessageReport This Post
Member
Posted Hide Post
Hi:
I believe the newer preamps (202, 282, 252, 552) allow you to do this on the AV input without adjusting the volume control (the unity gain feature).


Michael
 
Posts: 294 | Location: CT, USA | Registered: Thu 19 January 2006Edit or Delete MessageReport This Post
Jay
Senior Member
Posted Hide Post
quote:
Originally posted by saillandc:
Thanks for your reply Frank. Just to make sure I understand correctly, the stereo speaker cable would still be connected to the Naim part but let say a Denon AVR would be connected to the pre amp ?


That's right.

Connect the Denon to a spare input, let's say AUX. When you set the signal levels up on your Denon for surround set your 72's volume to something like 12:00. Something you will remember. Whenever you use the Denon reset the volume to 12:00.

Michael aludes to the newer pre's which enable you to set an input up as a unity gain input. Basically the signal bypasses the volume on the pre.

Jay

Is there a Naim pre-amp which allow this without requiring the volume dial trick ?
Regards,
Christophe[/QUOTE]
 
Posts: 1512 | Location: Londinium | Registered: Mon 20 November 2000Edit or Delete MessageReport This Post
Senior Member
Posted Hide Post
Ask naim, you may be able to get them to mod your 90 to give it unity gain. They did it with my 102
 
Posts: 570 | Location: London | Registered: Mon 27 August 2001Edit or Delete MessageReport This Post
Trade Member
Posted Hide Post
Stuart,

I think you meant his 72...


Regards,
Frank.

All opinions are my own and do not reflect the opinion of any organisations I work for, except where this is stated explicitly.
 
Posts: 4348 | Location: UK | Registered: Wed 09 August 2000Edit or Delete MessageReport This Post
Senior Member
Posted Hide Post
Oops Red Face
 
Posts: 570 | Location: London | Registered: Mon 27 August 2001Edit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  

Closed Topic Closed

Naim Audio Main Website    forums  Hop To Forum Categories  Naim Users  Hop To Forums  Home Theatre    Upgrade existing Naim system to Home Theatre

© Naim Audio Ltd, 2006.