Visit the Naim E-Store | Visit the Naim E-Store |
Topic Closed|
Go
|
New
|
Find
|
Tools
|
|
Member |
I have until today run a 5:1 system consisting of AV2/300/145/200. Front duties were handled by the 300 via a 52.
Unfortunately I have had to downsize and have replaced the 52/Super and 300 with a Dynavector pre/power. I have set this up with phono and CD but cannot work out if it possible to have a 5:1 system incorporating the AV2 and Dynavector pre using RCA connectors. I think I need to have a special connection between output 3 of the AV2 and a input on the preamp. My previous connection was din to din and no longer any use. Hope this is reasonably clear and any help appreciated. Thanks Neil |
||
|
|
Senior Member |
Neil,
Don't know about 'input 3'. Take the main channel out to an input of your choice on the preamp. Set the pre to a position you'll remember easily - 12? Use the noise generator to set the levels on the AV2. You're good to go. I use a Chord DIN to stereo RCA cable. I do this from the AV2 via my EAR864, no probs. M |
|||
|
|
Trade Member |
The DIN to RCA phono interconnect needs to be wired from the record output quadrant of the 5-pin DIN.
The output on DIN input socket 3 tracks the AV2 volume–but I believe there may be an RCA phono output that also does this (must check). |
|||
|
|
Senior Member |
Does the Dynavector have a unity gain input? If not its a case of changing the volume each time on the "AV" input You just need to either:- -modify your existing yellow banded lead to have RCA's on the non-banded end, at your own risk Or -obtain a 5pin din to RCA lead from us, via your dealer (that is correctly wired for use on AN3 output) |
|||
|
|
Member |
I realise that I can connect as before by simply substituting the din to din lead from the av2 to 52 with a din to rca lead to my new pre.
My query was whether any of the rca connections at the rear of the AV2 could mimic this connection as I have two rca to two rca interconnects available. Thanks Neil |
|||
|
|
Trade Member |
Try the RCA phono record out, just in case....
|
|||
|
|
Senior Member |
I have a feeling that tape out is a fixed output level.
Whilst you could use it in this mode, you would have to compensate accordingly with the volume on the Pre-amp, as the AV2 would not control this output when the vol was adjusted. |
|||
|
|
Trade Member |
–yep, fixed output (560R buffer) from analog inputs only.
|
|||
|
| Previous Topic | Next Topic | powered by eve community |
 | Please Wait. Your request is being processed... |
|
|||
| Site | forums | ||
| Servlet | eve1da042 | ||
| Version | 1.2.22 build 9062 | ||
| Module | Forums 4.0.3 | ||
| Stylesheet | "01 NaimStyle2 Regular" | ||
| Wordlet Set | "Default Wordlet Set" | ||
Topic Closed | View $GS_USERNAME's Public Profile |
| Add $GS_USERNAME to my Buddies |
| Add $GS_USERNAME to my Ignore List |
| View Recent Posts by $GS_USERNAME |
| Notify me of New Posts by $GS_USERNAME |
