System Pics 2006 - Topic Powered by eve community

Hi All.

Finally got the stuff out of boxes (never listened to as bought while moving). Sounds good (warm for a day) but expecting a second wave if what I read is correct.

Thanks to posts that informed me.
Thanks to eBay and tomtom for affordability.

System: CDX2/202/NAPSC/HICAP/200/NSATs/G's Hydra/Corras

Question: The left channel is on the left as I listen to it, right? (checked this with my iPod). So why is it on the right at the back of the amp (as you look at it) causing the speaker cables to cross?

Many thanks

Neil

Posts: 153 | Location: Just off the green | Registered: Sun 30 October 2005

Ignored post by badlyread posted

Show Post

badlyread

Member

Posted

Hide Post

And no comments about the carpet! Only been in 3 months and had other priorites!

Posts: 153 | Location: Just off the green | Registered: Sun 30 October 2005

Ignored post by badlyread posted

Show Post

badlyread

Member

Posted

Hide Post

missed an 'i'. Lucky really.

Posts: 153 | Location: Just off the green | Registered: Sun 30 October 2005

Ignored post by badlyread posted

Show Post

Geoff P

Senior Member

Posted

Hide Post

quote:
Question: The left channel is on the left as I listen to it, right? (checked this with my iPod). So why is it on the right at the back of the amp (as you look at it) causing the speaker cables to cross?

....Naim views everything from the back of their systems. When you do that everything is in the correct place.

Right Speaker outlet on the righthand side
Input sockets numbered 1 to 6 (7) from left to right,
Din wiring convention correct.

Basically fine except us poor HiFi geeks typically work from in front of the equipment cause there ain't no room round the back so we're confused. I actually get the drawing in the manual out and turn it upside down to help me from time to time.

Posts: 5893 | Location: across the channel, up a bit, then right for a while | Registered: Tue 10 December 2002

Ignored post by Geoff P posted

Show Post

loko

1st Timer

Posted

Hide Post

quote:
Originally posted by Geoff P:
quote:
Question: The left channel is on the left as I listen to it, right? (checked this with my iPod). So why is it on the right at the back of the amp (as you look at it) causing the speaker cables to cross?
....Naim views everything from the back of their systems. When you do that everything is in the correct place.

Right Speaker outlet on the righthand side
Input sockets numbered 1 to 6 (7) from left to right,
Din wiring convention correct.

Basically fine except us poor HiFi geeks typically work from in front of the equipment cause there ain't no room round the back so we're confused. I actually get the drawing in the manual out and turn it upside down to help me from time to time.

Hm, I find this a bit confusing. Do the speakers position in relation to the listening position in front of them. Sitting behind the equipment during listening would be quite suboptimal I guess.

Posts: 3 | Registered: Mon 28 November 2005

Ignored post by loko posted

Show Post

J.N.

Senior Member

Posted

Hide Post

Mr Walker;

How to make DBL's look small - excellent. The Hutter stack looks great too - really elegant.

Franz;

The SBL's look nice.

I hope that CD rack is very well screwed to a solid wall?

Cue Michael Jackson going "Aaoow".

John.

Posts: 5006 | Location: Norwich, Norfolk UK | Registered: Tue 11 December 2001

Ignored post by J.N. posted

Show Post

Neill Ferguson

Member

Posted

Hide Post

My system

Neill

Posts: 225 | Location: Scotland | Registered: Mon 09 February 2004

Ignored post by Neill Ferguson posted

Show Post

i.walker

Member

Posted

Hide Post

Thanks John,

Yes the Dbls do look tichy compared to the beasts dont they,they are my pride and joy though so they'll soon be back in prime position.Here's another of the hutter rack in better light i hope the finish is european cherry for anyone interested.

Ian.

Posts: 57 | Registered: Sat 09 August 2003

Ignored post by i.walker posted

Show Post

i.walker

Member

Posted

Hide Post

Yuk that was awfull,try again with this.

Posts: 57 | Registered: Sat 09 August 2003

Ignored post by i.walker posted

Show Post

Chillkram

Senior Member

Posted

Hide Post

quote:
quote:
Question: The left channel is on the left as I listen to it, right? (checked this with my iPod). So why is it on the right at the back of the amp (as you look at it) causing the speaker cables to cross?
....Naim views everything from the back of their systems. When you do that everything is in the correct place.

Right Speaker outlet on the righthand side
Input sockets numbered 1 to 6 (7) from left to right,
Din wiring convention correct.

Basically fine except us poor HiFi geeks typically work from in front of the equipment cause there ain't no room round the back so we're confused. I actually get the drawing in the manual out and turn it upside down to help me from time to time

Yup. Fell for that one myself!

Posts: 4245 | Location: Sudbury, Middlesex | Registered: Wed 08 February 2006

Ignored post by Chillkram posted

Show Post

saphorah

Member

Posted

Hide Post

quote:
Originally posted by badlyread:
Hi All.

Finally got the stuff out of boxes (never listened to as bought while moving). Sounds good (warm for a day) but expecting a second wave if what I read is correct.

Thanks to posts that informed me.
Thanks to eBay and tomtom for affordability.

System: CDX2/202/NAPSC/HICAP/200/NSATs/G's Hydra/Corras

Question: The left channel is on the left as I listen to it, right? (checked this with my iPod). So why is it on the right at the back of the amp (as you look at it) causing the speaker cables to cross?

Many thanks

Neil

Do you have any volume imbalance issues at low volumes with the 202??? Left or Right level higher when listening to low volume setting around 7'sh??

Posts: 245 | Registered: Sat 07 January 2006

Ignored post by saphorah posted

Show Post

tartarus

Member

Posted

Hide Post

quote:
Originally posted by joesilva:
I am attaching a link to a site with 6 photos of my present system :

http://web.mac.com/joe.silva/iWeb/Site/Photos.html

If anyone has any comments or recommendations with respect to system placement, or anything for that matter that may improve sound quality, these are most welcome.

Special thanks goes to Hungryhallibut for recomendations on Naim Fraim / equipment configuration.

Kind regards,

Joe

Joe,

I know this a silly question? But did you mix up your coloured with your dark items in the wash? viz LP12 mat...

Posts: 201 | Registered: Fri 01 August 2003

Ignored post by tartarus posted

Show Post

Ridzwan

Senior Member

Posted

Hide Post

i.walker,

Can you tell me what power distribution you are using (at the wall)?. Would you mind in opening and take a picture of it?

Thanks

Posts: 774 | Location: Antares | Registered: Sat 07 January 2006

Ignored post by Ridzwan posted

Show Post

Markus S

Senior Member

Posted

Hide Post

quote:
Originally posted by tartarus:
Joe,

I know this a silly question? But did you mix up your coloured with your dark items in the wash? viz LP12 mat...

It's a Funk Firm Achromat in blue. Recommended.

Posts: 1094 | Registered: Fri 10 January 2003

Ignored post by Markus S posted

Show Post

Cymbiosis

Trade Member

Posted

Hide Post

Joe,

Nice pictures....... now one for you!

System currently playing......provided PB doesn't get his way!

Best regards,

Peter

Posts: 3115 | Location: Leicester & Northamptonshire mainly! | Registered: Wed 22 January 2003

Ignored post by Cymbiosis posted

Show Post

Posted

Peter,

Now... how about to clean the space between these two beauties?

cheers,
S7

Cymbiosis

Trade Member

Posted

Hide Post

Sebastian,

I dont have a dust pan and brush big enough for the Loewe!

Peter.

The floor is not dusty - just full of spike holes!

Posts: 3115 | Location: Leicester & Northamptonshire mainly! | Registered: Wed 22 January 2003

Ignored post by Cymbiosis posted

Show Post

ken c

Senior Member

Posted

Hide Post

didnt get far with search, and its been a long time, can someone tell me or point me to instructions on how to attach photos to posts?

enjoy

ken

Posts: 3452 | Location: Hertfordshire, UK | Registered: Thu 31 August 2000

Ignored post by ken c posted

Show Post

Nuno Baptista

Senior Member

Posted

Hide Post

quote:
Originally posted by ken c:
didnt get far with search, and its been a long time, can someone tell me or point me to instructions on how to attach photos to posts?

enjoy

ken

You can use Imageshak
http://www.imageshack.us/

Posts: 2098 | Location: Coimbra Portugal | Registered: Mon 18 March 2002

Ignored post by Nuno Baptista posted

Show Post

Previous Topic | Next Topic

Page 1 ... 32 33 34 35 36 37 38 ... 106

Please Wait. Your request is being processed...

[x]

Site

forums

Servlet

eve1da042

Version

1.2.22 build 9062

Module

Forums 4.0.3

Stylesheet

"01 NaimStyle2 Regular"

Wordlet Set

"Default Wordlet Set"

Logout: forums
Update Groupee Account

Topic Closed

Naim Audio Main Website

forums

Naim Users

Hi-Fi Corner

System Pics 2006

	View $GS_USERNAME's Public Profile
	Add $GS_USERNAME to my Buddies
	Add $GS_USERNAME to my Ignore ListRemove $GS_USERNAME from my Ignore List
	View Recent Posts by $GS_USERNAME
	Notify me of New Posts by $GS_USERNAME

Quick Reply to: System Pics 2006
Guest Name

Close \| Quick Quote