Can a high output MC Dynavector 10x4 (2.5mV) be used with a K type phono board in a 82?

Thanks.

No.

You will need a 522 (MM) board.

Rico - SM/Mullet Audio

Actually, I ran a Grado Sonata (4.5 mv output)into an 82 with K boards for a week or so with no ill effects.

Actually, I expected very bad overload, but I never heard it.

But I got myself a pair of 522 boards as soon as possible.

Phil

If that's the case, I'll use my Exposure Super XV as a phono amp until I switch over to a low output cartridge.

I am considering getting a low output MC cartridge earlier.
What cartridges would work best with the K board?

Thanks.

[This message was edited by leeto on MONDAY 18 November 2002 at 11:09.]

Leeto

select your cart. Then select the correct board for it. To select the board first is like putting the cart before the horse.

Rico - SM/Mullet Audio

But if the "horse" can accept carts that are I have shortlisted, that would be the best...

Here are some of my preferred ones
Dyna 17D2 (first choice)

And if I win a small lottery,
Lyra Helikon Normal Output
Lyra Helikon Low Output
Dyna XX-1L

Would these work well or do I need the "S" board?

Come now, Leeto - next you'll be choosing speakers and then asking which amp is best for them!

The XX-1 is now superseded. You've also not revealed which arm/turntable you're running. Select your cartridge (to suit the T/T and arm), then the appropriate board. What does your friendly Naim dealer advise?

Rico - SM/Mullet Audio

PS - if you win the lottery the cost of the appropriate board (or more appropriately, a Prefix K or S) to match really won't be an issue, will it?

The K is said to work well with the Lyras. Many (ears I trust) prefer the S boards with the Dyanvectors as a more appropriate match.

quote:

---

Originally posted by Rico:
You've also not revealed which arm/turntable you're running. Select your cartridge (to suit the T/T and arm), then the appropriate board. What does your friendly Naim dealer advise?

---

Rega P9/RB1000. Bought the Naims(82/250/hicap) used and yet to deal with my friendly dealer yet. Will be dealing soon though.

quote:

---

Originally posted by Rico:
PS - if you win the lottery the cost of the appropriate board (or more appropriately, a Prefix K or S) to match really won't be an issue, will it?

---

No, it will not. But my 82 already comes with a K board and I am currently using the Dyna 10x4 high output. I am trying to work out which option gives the best bang for the sound and buck.

quote:

---

Originally posted by Rico:
The K is said to work well with the Lyras. Many (ears I trust) prefer the S boards with the Dyanvectors as a more appropriate match.

---

This is the answer I've been looking for.

Thanks.

Hi there,

What about Ortofon MC25FL, which board should I use?

cheers
Martin